FZT1048A document number ds33182 rev. 2 - 2 1 of 7 www.diodes.com july 2014 ? diodes incorporated FZT1048A a product line o f diodes incorporated 17.5v npn medium power high gain transistor in sot223 features ? bv ceo > 17.5v ? bv ces > 50v ? i c = 5a high continuous collector current ? i cm = 20a peak pulse current ? low saturation voltage v ce(sat) <45mv @ 500ma ? r sat = 50m ? @ 5a for a low equivalent on-resistance ? h fe specified up to 20a for a high gain hold-up ? lead-free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sot223 ? case material: molded plastic. ?green? molding compound ul flammability rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte ti n plated leads, solderable per mil-std-202, method 208 ? weight: 0.112 grams (approximate) applications ? solenoid, relay and actuator drivers ? dc modules ? motor control ordering information (note 4) product marking reel size (inches) tape width (mm) quantity per reel FZT1048Ata FZT1048A 7 12 1,000 notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (roh s 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html. marking information FZT1048A = product type marking code sot223 top view device s y mbol top view pin-out ? green fzt 651 fzt 1048a
FZT1048A document number ds33182 rev. 2 - 2 2 of 7 www.diodes.com july 2014 ? diodes incorporated FZT1048A a product line o f diodes incorporated absolute maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit collector-base voltage v cbo 50 v collector-emitter voltage v ceo 17.5 v emitter-base voltage v ebo 7 v continuous collector current i c 5 a peak pulse current i cm 20 a base current i b 500 ma thermal characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 5) p d 3.0 w (note 6) 2.0 (note 7) 1.6 (note 8) 1.2 thermal resistance, junction to ambient (note 5) r ja 41.7 c/w (note 6) 62.5 (note 7) 78.1 (note 8) 104 thermal resistance junction to lead (note 9) r jl 10.9 operating and storage temperature range t j, t stg -55 to +150 c esd ratings (note 10) characteristic symbol value unit jedec class electrostatic discharge - human body model esd hbm 8,000 v 3b electrostatic discharge - machine model esd mm 400 v c notes: 5. for a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm fr4 pcb; dev ice is measured under still air conditions whilst operating in a steady-state. 6. same as note (5), except the dev ice is mounted on 25mm x 25mm 2oz copper. 7. same as note (5), except the dev ice is mounted on 25mm x 25mm 1oz copper. 8. same as note (5), except the device is mounted on minimum recommended pad layout. 9. thermal resistance from junction to so lder-point (at the end of the collector lead). 10. refer to jedec specification jesd22-a114 and jesd22-a115.
FZT1048A document number ds33182 rev. 2 - 2 3 of 7 www.diodes.com july 2014 ? diodes incorporated FZT1048A a product line o f diodes incorporated thermal characteristics and derating information 100m 1 10 100 10m 100m 1 10 single pulse. t amb =25c 52mmx52mm fr4 2oz cu v ce(sat) limit 100s 1ms 10ms 100ms 1s dc safe operating area i c collector current (a) v ce collector-emitter voltage (v) 0 20 40 60 80 100 120 140 160 0.0 0.5 1.0 1.5 2.0 2.5 3.0 25mmx25mm fr4 1oz cu 52mmx52mm fr4 2oz cu derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 52mmx52mm fr4 2oz cu transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t amb =25c 52mmx52mm fr4 2oz cu pulse power dissipation pulse width (s) max power dissipation (w)
FZT1048A document number ds33182 rev. 2 - 2 4 of 7 www.diodes.com july 2014 ? diodes incorporated FZT1048A a product line o f diodes incorporated electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition collector-base breakdown voltage bv cbo 50 85 ? v i c = 100a collector-emitter breakdown voltage bv ces 50 85 ? v i c = 100a collector-emitter breakdown voltage bv cev 50 85 ? v i c = 100a, v eb = 1v collector-emitter breakdown voltage (note 11) bv ceo 17.5 24 ? v i c = 10ma emitter-base breakdown voltage bv ebo 7 8.7 ? v i e = 100a collector cut-off current i cbo ? 0.3 10 na v cb = 35v collector cut-off current i ces ? 0.3 10 na v cb = 35v emitter cut-off current i ebo ? 0.3 10 na v eb = 4v collector-emitter saturation voltage (note 11) v ce(sat) ? 27 45 mv i c = 500ma, i b = 10ma ? 55 75 i c = 1a, i b = 10ma ? 155 210 i c = 3a, i b = 15ma ? 250 350 i c = 5a, i b = 25ma base-emitter saturation voltage (note 11) v be(sat) ? 920 1000 mv i c = 5a, i b = 25ma base-emitter turn-on voltage (note 11) v be(on) ? 880 970 mv i c = 5a, v ce = 2v dc current gain (note 11) h fe 290 440 1200 ? i c = 10ma, v ce = 2v 300 450 1200 i c = 1a, v ce = 2v 180 300 ? i c = 5a, v ce = 2v 50 90 ? i c = 20a, v ce = 2v output capacitance c obo ? 60 80 pf v cb = 10v, f = 1mhz current gain-bandwidth product f t ? 150 ? mhz v ce = 10v, i c = 50ma, f = 50mhz switching times t on ? 120 ? ns i c = 4a, v cc = 10v, i b1 = -i b2 = 40ma t off ? 310 ? note: 11. measured under pulsed conditions. pulse width 300s. duty cycle 2
FZT1048A document number ds33182 rev. 2 - 2 5 of 7 www.diodes.com july 2014 ? diodes incorporated FZT1048A a product line o f diodes incorporated typical electrical characteristics (@t a = +25c, unless otherwise specified.)
FZT1048A document number ds33182 rev. 2 - 2 6 of 7 www.diodes.com july 2014 ? diodes incorporated FZT1048A a product line o f diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. sot223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e ? ? 4.60 e1 ? ? 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm dimensions value (in mm) x1 3.3 x2 1.2 y1 1.6 y2 1.6 c1 6.4 c2 2.3 a1 a x2 c1 c2 x1 y2 y1
FZT1048A document number ds33182 rev. 2 - 2 7 of 7 www.diodes.com july 2014 ? diodes incorporated FZT1048A a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when prope rly used in accordance with instructions for use provided in the labeling can be reasonably expected to re sult in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
